It’s essential to keep your Kenmore dishwasher clean and running smoothly. A clean dishwasher will not only save you time and energy, but it will also help prevent unwanted bacteria, mold, and mildew buildup. Fortunately, cleaning a Kenmore dishwasher is easy. Follow these simple steps to keep your dishwasher sparkling clean.
Step 1: Empty the Dishwasher
Before you start cleaning, make sure to empty the dishwasher. Remove any dishes, silverware, and any other items that might be inside. Set them aside while you clean.
Step 2: Clean the Filter
Locate the filter in the bottom of the dishwasher. Remove any food particles and other debris that may have collected in the filter. Rinse the filter with warm water and set aside to dry.
Step 3: Wipe Down the Interior
Using a damp cloth, wipe down the interior of the dishwasher. Make sure to wipe down the door, walls, and bottom of the dishwasher. This will help remove any built up dirt and grime. Additionally, use an old toothbrush to get into crevices and small spaces.
Step 4: Run a Cleaning Cycle
Once the interior is clean, you can run the dishwasher on a cleaning cycle. Select the hottest water setting on the dishwasher and add a cup of white vinegar or baking soda to the bottom of the dishwasher. Let the cycle run for a few minutes and then turn it off.
Step 5: Clean the Exterior
Use a soft cloth and gentle cleaner to clean the exterior of the dishwasher. Make sure to wipe down the outside of the door, sides, and top of the dishwasher. Additionally, you can use a stainless steel cleaner to polish the exterior.
Step 6: Clean the Detergent Dispenser
The detergent dispenser should be cleaned regularly to prevent clogs. Remove the detergent dispenser from the dishwasher and rinse it with warm water. If there is any built up detergent, use a soft brush or toothbrush to remove it. Make sure to rinse it thoroughly before replacing it.
Step 7: Clean the Door Gasket
The door gasket is the rubber seal around the dishwasher door. It’s important to keep this area clean to ensure a tight seal. Use a damp cloth to wipe down the door gasket. Additionally, you can use a toothbrush to get into tight spots and remove any built up grime.
Step 8: Reinstall the Filter
Once the filter is dry, reinstall it into the bottom of the dishwasher. Make sure it’s secure and tightly fitted. Additionally, check to make sure the filter isn’t clogged or blocked.
Step 9: Run a Rinse Cycle
Run the dishwasher on a rinse cycle to remove any remaining cleaning solution. Make sure to select the hottest water setting and use a rinse aid if desired.
Step 10: Dry the Dishes
Once the rinse cycle is complete, open the door to let the dishes air dry. This will help prevent any water spots from forming on the dishes. Additionally, you can use a towel or cloth to wipe down the interior of the dishwasher.
Conclusion
Cleaning your Kenmore dishwasher is easy and can help keep it running smoothly. Make sure to empty the dishwasher before you start cleaning and use a damp cloth and gentle cleaner to wipe down the interior and exterior. Additionally, use a stainless steel cleaner to polish the exterior and make sure to run a rinse cycle to remove any remaining cleaning solution. Following these simple steps will help keep your dishwasher clean and running efficiently.