A broken toilet handle can be an irritating problem, especially when you have an urgent need to use the bathroom. The good news is that fixing a broken toilet handle is a rather simple task, and with the right tools and materials, you can be done in no time. Read on to find out what you need to do to get your toilet’s handle back in working order.
Identify the Problem
The first step to fixing your broken toilet handle is to identify the problem. If your handle is loose and wobbly, it may just need to be tightened. On the other hand, if the handle is broken or cracked, it will need to be replaced. If the handle is worn or corroded, it may need to be cleaned or replaced. Once you’ve identified the issue, you can move on to the next step.
Gather the Necessary Tools and Materials
Before you begin, it’s important to make sure you have all the tools and materials you need. For a loose handle, you’ll need a flathead screwdriver and some plumber’s grease. If you’re replacing a broken handle, you’ll need a Phillips head screwdriver and a new handle. For a worn or corroded handle, you’ll need a wire brush, some steel wool, and some WD-40. Make sure you have all the necessary supplies before you begin.
Remove the Old Handle
If you’re replacing a broken handle, you’ll need to remove the old one first. To do this, take a Phillips head screwdriver and unscrew the handle from the tank. It should come off easily. If you’re just tightening the handle, you won’t need to do this step.
Clean or Replace the Handle
If the handle is worn or corroded, you’ll need to clean it first. To do this, use a wire brush or steel wool to scrub away any rust or corrosion. Once the handle is clean, spray it with some WD-40 to lubricate it. If the handle is broken or cracked, it will need to be replaced. To do this, find a replacement handle that matches your toilet and install it in place of the old one.
Reattach the Handle
Once the handle is clean or replaced, you can reattach it to the tank. To do this, take the flathead screwdriver and tighten the screws on the handle. Make sure the handle is secure and won’t move when you pull it. Once the handle is securely attached, you’re done!
Test the Handle
Before you call it a day, make sure the handle is working properly. To do this, simply pull the handle and flush the toilet. If the toilet flushes properly, you’re all set. If not, you may need to check the handle again to make sure it’s secure.
Conclusion
Fixing a broken toilet handle is a relatively easy task that anyone can do with the right tools and materials. All you need to do is identify the issue, gather the necessary supplies, remove the old handle, clean or replace it, and reattach it to the tank. Once you’re done, test the handle to make sure it’s working properly. With a few simple steps, you can have your toilet’s handle back in working order in no time!