Are you looking for an easy and cheap way to get rid of those car dents that are ruining your car’s look? Well, you’ve come to the right place. We’ll show you a few simple DIY solutions to help you get the job done right. With the right supplies and a bit of patience, you can have your car looking like new in no time!
What You Need
The first step is to get the right supplies. You will need a few basic items to get the job done right. These include a hairdryer, a can of compressed air, rubbing alcohol, and a plastic putty knife. You may also need some sandpaper if the dent is particularly deep or stubborn. Once you have all of these items, you’re ready to get started.
Applying Heat
The first step is to apply heat to the dent. Using your hairdryer, apply a steady stream of warm air to the dent for about 10 minutes. This will help to soften the metal and make it more malleable. Be sure to keep the heat focused on the dent and not on the surrounding paint. You don’t want to damage the paint on your car.
Applying Pressure
Once the metal is softened, you can begin to apply pressure to the dent. Using your plastic putty knife, begin to press down on the dent. Be sure to apply even pressure so that the dent is evenly pushed out. You may need to keep applying heat as you are pushing down. This will help the metal to remain soft and pliable.
Using Compressed Air
If you find that pushing down on the dent isn’t working, you can also try using compressed air. Place the nozzle of the can of compressed air over the dent and spray for a few seconds. This will help to push the metal outward and should help to get rid of the dent.
Using Rubbing Alcohol
If the dent is particularly stubborn, you can try using rubbing alcohol. Apply a small amount of rubbing alcohol to a cotton swab and dab it onto the dent. This will help to soften the metal even further and should help to get rid of the dent. Be sure to use a clean piece of cloth to wipe away any excess rubbing alcohol after you’re done.
Sanding
If you still have trouble getting rid of the dent, you may need to resort to sanding. Using a piece of sandpaper, carefully sand down the area around the dent. Be careful not to sand too much as this could damage the paint on your car. Once you have sanded the area, you should be able to apply pressure to the dent and get it to pop back out.
Painting
After you have gotten rid of the dent, you may need to touch up the paint in the area. This will help to make the area look like new again. The best way to do this is by using a paint pen. Simply match the color of the pen to the color of the car and touch up any scratches or dents that may have been left behind.
Conclusion
Getting rid of car dents doesn’t have to be a difficult or expensive task. With the right supplies and a bit of patience, you can easily get the job done. Just remember to be careful not to damage the paint on your car and you should be good to go!