Drywall anchors are a great way to securely attach objects to your walls without having to worry about the item falling off or damaging the wall. Whether you’re hanging a heavy picture frame, installing shelves, or mounting a TV, drywall anchors are an essential tool for any home improvement project. Inserting drywall anchors is an easy job that requires minimal tools and supplies. Read on to learn how to insert drywall anchors.
Tools and Supplies Needed
Before you start inserting drywall anchors, make sure you have all the necessary tools and supplies. You’ll need a drill, a drill bit that’s slightly smaller than the anchor, and a Phillips screwdriver. For the anchors themselves, you’ll need a hammer-in plastic anchor or a toggle bolt anchor. Hammer-in anchors are used for lighter items, while toggle bolt anchors are better for heavier items. You’ll also need wallboard screws and a wallboard hole saw, if necessary.
Step 1: Mark the Wall
The first step in inserting drywall anchors is to mark the wall where you want to insert the anchor. Using a pencil, mark the spot on the wall where you want to insert the anchor. If you’re using a toggle bolt anchor, you’ll need to make sure the hole is large enough for the toggle to fit through. If the hole isn’t large enough, you’ll need to use a wallboard hole saw to make it larger.
Step 2: Drill the Hole
Once you’ve marked the spot on the wall, use a drill with a drill bit that’s slightly smaller than the anchor to drill a hole in the wall. Make sure you wear safety goggles when drilling to protect your eyes from any flying debris. Once the hole is drilled, hold the anchor up to it and make sure the hole is the right size.
Step 3: Insert the Anchor
Once you’ve confirmed that the hole is the right size, it’s time to insert the anchor. If you’re using a hammer-in plastic anchor, insert it into the hole and tap it in with a hammer. If you’re using a toggle bolt anchor, insert the bolt first and then compress the toggle wings. Once the anchor is inserted, make sure it’s securely in place by pulling on it.
Step 4: Secure the Anchor
The next step is to secure the anchor to the wall. If you’re using a hammer-in plastic anchor, use a Phillips screwdriver to tighten the screw into the anchor. If you’re using a toggle bolt anchor, use a wallboard screw to secure it. Make sure the screw is tight and the anchor is secure before moving on.
Step 5: Install the Object
Once the anchor is securely in place, you can install the object you’re trying to attach. Insert the screws into the holes of the object and screw them into the anchor. Make sure the screws are tight and the object is securely attached before you let go of it.
Tips for Inserting Drywall Anchors
When inserting drywall anchors, it’s important to take your time and make sure the anchor is properly installed. Here are a few tips to keep in mind:
- Always wear safety goggles when drilling.
- Make sure the hole is the right size for the anchor.
- Use a toggle bolt anchor for heavier items.
- Tighten the screw into the anchor with a Phillips screwdriver.
- Make sure the object is securely attached before letting go of it.
Conclusion
Inserting drywall anchors is an easy job that requires minimal tools and supplies. With the right tools and supplies and a little bit of know-how, you can easily insert drywall anchors and securely attach objects to your walls. Now that you know how to insert drywall anchors, you can easily tackle any home improvement project.