For those of us who wear glasses, the fit of our frames is of the utmost importance. We want them to look good, but they also need to be comfortable and secure. The last thing you want is for your glasses to be constantly slipping down your nose! If you’re having this problem, it might be time to make your glasses tighter.
Step One: Check Your Temples
The part of your glasses that goes around the back of your head is the temple. This is the piece that is most likely to loosen over time. To check your temples, put your glasses on and grasp the temple pieces with your hands. Gently try to pull the temples away from your head. If you can move them easily, then they are too loose and need to be tightened.
Step Two: Tighten the Screws
Once you’ve determined that your temples need to be tightened, the next step is to actually do it. Most glasses frames have two small screws located near the hinges. These screws can be tightened or loosened to adjust the fit. To tighten the screws, you will need a screwdriver that is small enough to fit in the holes. Once you’ve located the screws, turn them clockwise with the screwdriver until they are tight.
Step Three: Bend the Temples
If you’ve tightened the screws and your glasses are still slipping, then it might be time to try bending the temples. This will require an extra bit of care, as you don’t want to break the frames. Start by gently pushing the temple pieces towards your head. If this doesn’t help, then you can try bending them outwards, away from your head. Do this slowly and carefully, and only bend the frame a very small amount. Once you’ve achieved the desired fit, make sure to check the screws one more time to ensure that they are still tight.
Step Four: Adjust the Nose Pads
Most glasses frames have adjustable nose pads. These are the small pieces of plastic or metal that rest on either side of your nose. To adjust the nose pads, start by pushing them closer together. If you need more grip, then you can also try pushing them away from each other. This will create a tighter fit on your nose. If you’re having trouble getting a secure fit, then you can also try bending the nose pads slightly.
Step Five: Check the Fit
Once you’ve adjusted the temples and nose pads, it’s time to check the fit. Put your glasses on and make sure that they feel secure and comfortable. If you can still feel them slipping, then you can go back and make further adjustments. It might take a few tries, but eventually you should be able to get a fit that works for you.
Step Six: Repeat as Needed
Your glasses will eventually loosen over time, so you might need to repeat these steps periodically. This is especially true if you wear your glasses every day. It’s a good idea to check the fit every few weeks and make any necessary adjustments. This will help ensure that your glasses stay secure and comfortable.
Conclusion
Making your glasses tighter is a fairly simple process. All you need is a screwdriver and a bit of patience. Start by checking the temples to see if they need to be tightened. Then adjust the screws and nose pads as needed. With a few simple steps, you should be able to get your glasses fitting securely and comfortably again.