If you’re looking for a comprehensive guide on how to put ends on coax cable, you’ve come to the right place. Coax cable is a type of wiring used to connect electronic devices like TVs, computers, and radios. It’s a popular choice for many electronic applications since it’s relatively easy to install and offers better signal clarity than other types of wiring. In this article, we’ll provide a step-by-step guide on how to put ends on coax cable.
Step 1: Gather the Necessary Materials
Before you begin putting ends on coax cable, you’ll need to gather the necessary materials. This includes the coax cable itself, a coaxial connector, a coaxial crimper, and a set of pliers. The coaxial connector is the most important part of the process, as it’s used to connect the two ends of the coax cable. You can easily find all of these materials at any electronics store or online.
Step 2: Measure and Cut the Coax Cable
Once you have all of your materials, it’s time to measure and cut the coax cable. Make sure you measure the cable accurately and cut it to the desired length. It’s important to leave some extra length so you can easily attach the connector. After the cable is cut, use the pliers to strip away the outer jacket of the cable. This will expose the inner conductors, which will be used to connect the cable to the connector.
Step 3: Attach the Connector
The next step is to attach the connector to the coax cable. Start by inserting the exposed conductors into the connector. Make sure the conductors are properly secured in the connector. Once the conductors are in place, use the crimper to tighten the connector. This will ensure a secure connection between the cable and the connector.
Step 4: Test the Connection
Once the connector is attached, it’s important to test the connection. To do this, use a multimeter to test the continuity of the connection. Make sure the multimeter is set to measure ohms. If the multimeter reads a value of zero, then the connection is working properly. If the multimeter reads a value greater than zero, then the connection needs to be adjusted.
Step 5: Secure the Connection
Once the connection is tested and verified, it’s important to secure it. To do this, wrap electrical tape around the connector and the cable. This will help keep the connection in place and prevent it from coming loose. Make sure the tape is securely wrapped around the connector and the cable. This will ensure a tight and secure connection.
Step 6: Label the Cable
To ensure the connection is easy to identify, you should label the cable. This can be done with a marker or a label maker. Label the cable with its destination and any other pertinent information. This will make it easy to identify the cable when it’s time to install it. It’s also a good idea to label both ends of the cable.
Conclusion
Putting ends on coax cable is a relatively simple process. All you need is the right materials and a basic understanding of how to put ends on coax cable. With this guide, you should be able to easily put ends on coax cable and create a secure connection. Make sure to label the cable properly and test the connection before using it. With the right materials and knowledge, you can easily put ends on coax cable.