Cement is a strong adhesive that is commonly used in home construction and repair projects. Unfortunately, cement can be difficult to remove and can leave behind a stubborn residue on tiles. This can be especially frustrating when you’ve just finished a project and want to enjoy the beautiful outcome.
Luckily, removing cement from tile is possible and can be done relatively quickly. Depending on the type of tile, there are a few methods that you can use to get rid of the cement and restore the beauty of your tile.
Using Vinegar and Baking Soda
One of the most effective ways to remove cement from tile is to use a paste made from vinegar and baking soda. To create the paste, mix equal parts of white vinegar and baking soda until you get a thick, spreadable paste. Once you have the paste ready, spread it over the cement covered area and let it sit for 10 to 15 minutes.
After the paste has had a chance to set, use a soft scrub brush to gently scrub the paste off the tile. This method should remove most of the cement, but if there are still some stubborn stains, you may need to use a stronger cleaner.
Using Acetone
If the vinegar and baking soda paste doesn’t do the trick, you can try using a stronger cleaner like acetone. Acetone is typically used for removing nail polish, but it can also be used for removing cement from tile. To use acetone, pour some of the liquid onto a soft cloth and gently scrub the cement covered areas. Be sure to use a gentle scrubbing motion so you don’t damage the tile.
Once you’ve finished scrubbing, use a damp cloth to wipe off any remaining acetone and then dry the area with a clean cloth. This method should remove most of the cement, but if there are still some stubborn stains, you may need to use a stronger cleaner.
Using a Pressure Washer
If you have a pressure washer, you can use it to remove cement from tile. To use a pressure washer, set the nozzle to a low setting and spray the tile with water. The pressure of the water should be enough to loosen and remove the cement. Make sure to keep the nozzle at least 12 inches away from the tile to avoid damaging it.
Once you’ve finished spraying the tile, use a soft brush to scrub away any remaining cement. Be sure to use a gentle scrubbing motion so you don’t damage the tile. Once you’ve finished scrubbing, use a damp cloth to wipe off any remaining dirt and then dry the area with a clean cloth.
Using a Scraper
If all else fails, you can try using a scraper to remove the cement from tile. To use a scraper, hold the scraper at a 45-degree angle and gently scrape away the cement. Be sure to move the scraper in a single direction and avoid scraping too hard or you may damage the tile.
Once you’ve finished scraping, use a damp cloth to wipe off any remaining dirt and then dry the area with a clean cloth. This method should remove most of the cement, but if there are still some stubborn stains, you may need to use a stronger cleaner.
Conclusion
Removing cement from tile can be a frustrating task, but it is possible. Depending on the type of tile, there are a few methods that you can use to get rid of the cement and restore the beauty of your tile. From using vinegar and baking soda to using a pressure washer or scraper, there are a variety of methods that you can use to remove cement from tile.