Step 1: Power Off the iPhone
When you first realize that your iPhone has been submerged in water, you need to power it off immediately. This will help to prevent any further damage from occurring, such as short-circuiting. Press and hold the Sleep/Wake button until a slider appears. Slide the slider with your finger to power off the iPhone. Do not attempt to power on the phone until you have completed the following steps to remove the water.
Step 2: Remove the SIM Card
The next step is to remove the SIM card from your iPhone. This is important because water can cause damage to the SIM card if it is not removed. To remove the SIM card, use a SIM card ejector tool or a paperclip to push the SIM card tray out of the iPhone. Once removed, place the SIM card in a safe place to protect it from further damage.
Step 3: Remove the Battery
If possible, remove the battery from the iPhone to help prevent any further water damage. To do this, unscrew the two screws at the bottom of the phone and carefully lift the back panel off the device. Once removed, disconnect the battery from the iPhone and set it aside in a safe place. If the battery is not removable, skip this step.
Step 4: Wipe Away Excess Water
Once the SIM card and battery are removed, use a clean, dry cloth to wipe away any excess water from the surface of the iPhone. Make sure to pay special attention to the ports and other openings, such as the headphone jack and charging port. This will help to remove any water that may have seeped into the device.
Step 5: Use a Vacuum
Once you have wiped away any excess water, use a vacuum to suck up any remaining water. This is especially important if the device has been submerged in water for a long period of time. Use the vacuum’s crevice tool to get into hard-to-reach areas, such as the ports and other openings. Vacuuming will help to remove any remaining traces of water that may have seeped into the iPhone.
Step 6: Place the iPhone in Rice
Once you have vacuumed the device, place it in a bowl of uncooked rice. The rice will absorb any remaining water and help to prevent further damage. Allow the iPhone to sit in the rice for at least 24 hours before attempting to power it on. Make sure to check the rice regularly to make sure it is still absorbing moisture.
Step 7: Reassemble the iPhone
After 24 hours have passed, remove the iPhone from the rice and reassemble it. Replace the battery and SIM card, if applicable, and screw the back panel back into place. Make sure all of the screws are securely in place before attempting to power on the device.
Step 8: Power On the iPhone
Once the iPhone is reassembled and all the screws are securely tightened, press and hold the Sleep/Wake button until the Apple logo appears. If the device powers on without any issues, you have successfully taken the water out of the iPhone. If the device does not power on, contact an Apple store or authorized service provider for further assistance.
Conclusion
Taking water out of an iPhone can be a tricky process, but by following the steps outlined above, you can help to prevent further damage and keep your device running smoothly. If your iPhone has been submerged in water for a long period of time, it is best to contact an Apple store or authorized service provider for further assistance.